Best Safety Harness For Construction in 2022 [*Top Picks*]

Looking for the best safety harness for construction on the market? We’ve got you covered. Check out our ratings of absolute bestsellers below and make a final decision.

1005 Reviews Scanned

  • KwikSafety (Charlotte, NC) THUNDER 3D Ring Safety Harness (Pass Through Connectors) OSHA ANSI Industrial Full Body Fall Protection Personal Equipment Construction Carpenter Scaffold Contractor
    Bestseller #1
    KwikSafety (Charlotte, NC) THUNDER 3D Ring Safety Harness (Pass Through Connectors) OSHA ANSI Industrial Full Body Fall Protection Personal Equipment Construction Carpenter Scaffold Contractor (774)
      WE DON'T CUT CORNERS ON SAFETY: This construction harness is a durable, heavy duty, high performance Full Body Harness that meets and exceeds ANSI/ASSE Z359.11-2014 standards. Our safety harness fall protection is the complete safety package. Be seen and safe with the fluorescent yellow synthetic material. Use with any compatible fall protection safety lanyard, energy absorbers, lifelines, and anchorage lanyards. Safely perform the job knowing the THUNDER fall protection harness has your back! HEAVY DUTY D-RINGS: Our fall arrest harness is fully equipped with two side (2) D Rings and (1) Dorsal Ring suitable for primary fall arrest attachment, travel restraint, and rescue. The construction harness has load bearing straps, made from pure, non-recycled synthetic material that is water repellant, has superior stitching, and resistant against ageing, heat, and abrasion. Ensure a safe and proper fit with three (3) pass-through buckles located on the hips, chest and legs of the harness. PROPER FIT, PROPER PERFORMANCE: Regardless if its a mens or womens harness, correct fit is essential for proper performance. Our adjustable construction safety harness supports users within a small medium large capacity range of 130 to 310 pounds (59 to 140 kg), 4’10” to 6’6” (147 to 198 centimeters) due to the adjustment points. To ensure your harnesses properly fit, see that all buckles are connected, leg and shoulder straps are snug, and chest straps are in the center of the chest area. WE MET THE STANDARD, THEN ROSE ABOVE IT: ANSI/ ASSE Z359.11-2014 - All of KwikSafety’s full-body harnesses have undergone the “Qualification and Verification Testing of Fall Protection Products.” The THUNDER exceeds the already-rigorous ANSI testing standards and is heavy-duty, high-performance fall protection you can trust to have your back. Working at heights 6 ft or more? Equip yourself with the proper fall arrest system. View the Compliance Label/ Safety Label for more information. OSHA APPROVED: The Occupational Safety & Health Administration assures men and women safe and healthful working conditions by setting standards and providing training, outreach, education, and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels. The THUNDER safety fall protection harness is ideal for a roofer, ironworker, construction work, arborist work, high-rise window cleaning, gutter cleaning, roofing and thatching, and Search and Rescue.
  • 3M™ Protecta® Comfort Construction Style Positioning Harness 1161205, Black, Medium/Large, 1 EA/Case
    Bestseller #1
    3M™ Protecta® Comfort Construction Style Positioning Harness 1161205, Black, Medium/Large, 1 EA/Case (76)
      Replaces Manufacturer Part Number 1191209 Fixed D-ring reduces the need for readjustment throughout the workday Specifically designed for added comfort Moisture-wicking, breathable back padding with soft edging for added comfort Foam hip pad with mesh provides extra comfort and breathability Durable and sturdy belt for tool bag-carrying convenience Modern design gives harness a fresh and sleek look
  • Palmer Safety Fall Protection Safety Harness w/Detachable 6' Single Leg Lanyard I EXTERNAL Shock Absorber Lanyard I OSHA/ANSI Fall Arrest Kit I Ideal for Industrial & Construction Use (Yellow - 1pk)
    Bestseller #1
    Palmer Safety Fall Protection Safety Harness w/Detachable 6' Single Leg Lanyard I EXTERNAL Shock Absorber Lanyard I OSHA/ANSI Fall Arrest Kit I Ideal for Industrial & Construction Use (Yellow - 1pk) (293)
      🧰 WORK SAFELY - Palmer Safety Harnesses are designed and tested to comply with applicable OSHA and ANSI standards for fall protection equipment. When used as a component in a personal fall arrest system, or a personal restraint system, the Palmer Safety harnesses provide workers with the full body harness system designed to allow the body to help absorb the impacts of a fall should one occur. 🧰 ADJUST WITH EASE - The fall protection body harness has 3 easily accessible adjustment points to ensure a comfortable fit a wide range of body types properly and safely. The dorsal D-ring for fall arrest with buckle leg straps and is compatible for a quick and safe connection with any manufacturer’s ANSI compliant fall protection equipment. Palmer Safety Full Body Safety Harness are designed for use by person with a combined Weight (clothing, tools, etc.) of 130 – 310 lbs. (59 – 140 kg) 🧰 RELIABLY DURABLE - We provide fall protection gear that is built to last and can keep you out of harm’s way. The 6’ lanyard with personal absorber has these physical parameter: Webbing: Polyester, Width: 0.98 in, Breaking Strength: 6000 lbs., Stitching Thread: High-tenacity polyester | Metal Component: Alloy Steel, Finish: Silver or yellow golden galvanized | Weight: 2.72 lbs 🧰 COMPLIANT WITH SAFETY STANDARDS - We take working environment safety very seriously. That’s why our fall protection fall arrest kit complies with OSHA standards as well as meet in some cases exceed ANSI/ASSE Z359.11-2014. A10.32-2012 & Z359.13-2013 fall protection requirements. It’s a must-have for safe and fully-compliant work operations in Ports, Highways, Government buildings, Military Installations, Residential & Commercial Construction, Roofing. 🧰 WHY PLANK SUPPLY – We provides our customers with the tools and materials needed to complete their project safely and affordably. We focus on servicing the industrial and residential contractors to the weekend DIY warrior with our brand ATERET in rope, personal protective equipment and fall protection. Customer service and satisfaction is the key to our success by quickly delivering great products at affordable prices
  • 3M DBI-SALA ExoFit 1108652 Tower Climbing Harness, Front/Back/Side D-Rings, Belt/Back Pad, Seat Sling w/Position D-Rings, QC Buckles, Large, Blue/Gray
    Bestseller #1
    3M DBI-SALA ExoFit 1108652 Tower Climbing Harness, Front/Back/Side D-Rings, Belt/Back Pad, Seat Sling w/Position D-Rings, QC Buckles, Large, Blue/Gray (117)
      Built-in shoulder, back and leg comfort padding Back D-ring Quick connect chest and leg straps Soft, lightweight webbing Back D-ring, belt with pad and side D-rings, seat sling with suspension D-rings, quick connect buckle leg straps, built-in comfort padding (size Large) For industrial/occupational use only.
  • Safety Harness Fall Protection Kit, Construction Full Body System JO-2
    Bestseller #1
    Safety Harness Fall Protection Kit, Construction Full Body System JO-2 (55)
      SAFETY DESIGN PERFORMANCE: YMACHRAY Full Body Harness JO-02 are used for fall arrest, positioning, travel restraint, suspension and rescue applications. When supported by the dorsal attachment during a fall, the design of our Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. Each of our products is Individually inspected PROPER PERFORMANCE: Correct fit is essential for proper performance. Our YMACHRAY Full Body Harness supports users within the capacity range of 100 to 280 pounds (45 to 127 kg). To ensure proper fit, ensure that all pass-through connectors are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area. MULTI-PURPOSE Harnesses include rear D-rings and are ideal for use as a general harness tool in a variety of applications, it's and ideal tools for roofing, ladder climbing, construction site worker, warehouse forklift cage work, and for ironworker. CONTOURED DESIGN: Minimizes contact around the neck, lower back and inner thighs to reduce chafing and irritation; vibrant color for easy identification, greater visibility and increased safety,SINGLE-HAND ADJUST/RELEASE CAM BUCKLE. WARRANTY: 45 Days Money-Back & 2 Years Warranty, When You Are Not Satisfied with Our Product, Please Don't Hesitate to Contact Us. BUY WITH CONFIDENCE.
  • Guardian 00815 BOS-T50 Bucket of Safe-Tie - 5 Gallon Bucket, 50 ft. Vertical Lifeline Assembly, 5 Temper Reusable Anchor, Safety Harness Kit
    Bestseller #1
    Guardian 00815 BOS-T50 Bucket of Safe-Tie - 5 Gallon Bucket, 50 ft. Vertical Lifeline Assembly, 5 Temper Reusable Anchor, Safety Harness Kit (386)
      Safety Kit: Safe-tie Bucket is primarily designed for the safety of roofers and other crew members to help prevent accidental falls. It is perfect for restraint applications in construction work, roofing, thatching, and high-rise window cleaning tasks. Comfort: Safe-Tie Bucket undergoes rigorous testing standards to ensure optimum performance every time. Full-body harness with 5 adjustment points, features anti-slip back placard for user comfort. The bucket allows a maximum free fall of only 6 feet Shock Absorber: Lifeline assembly comes with an integrated shock absorber that eliminates the need of additional shock-absorbing lanyard. This also means lesser dead weight transferred to the dorsal D-ring which helps in reducing fatigue and increasing comfort for the user Safe-Tie Bucket: This Guardian roofing safety kit keeps equipment packed together when traveling to different jobsites. The waterproof bucket has a harness, anchor, and lifeline, made with steel, polyester, and nylon to boost durability. Specifications: OSHA, ANSI compliant Qual-Craft fall protection bucket has a capacity of 130 - 310 lbs and weighs 15 LBS. It includes 5 temper reusable anchor, universal velocity harness HUV, vertical lifeline assembly, shock pack, permanently attached positioning device, and 18in. lanyard extension
  • KwikSafety (Charlotte, NC) SCORPION Safety Harness w/attached 6ft. Tubular Lanyard on back | OSHA ANSI Fall Protection | INTERNAL Shock Absorbing Lanyard | Construction Carpenter Scaffolding
    Bestseller #1
    KwikSafety (Charlotte, NC) SCORPION Safety Harness w/attached 6ft. Tubular Lanyard on back | OSHA ANSI Fall Protection | INTERNAL Shock Absorbing Lanyard | Construction Carpenter Scaffolding (774)
      FULL ON FALL PROTECTION: You’re ready to work hard up high right off the bat with KwikSafety’s SCORPION Fall Protection System. The integrated single-leg lanyard and snap hook attached to the safety harness give you a complete safety package that’s ready and proven to perform in the worst-case scenario. GET HOOKED: The internal shock-absorbing lanyard makes the SCORPION a more lightweight fall protection device. A dual-action, double-locking snap hook prevents accidental rollout while remaining easy to latch on to your anchor point. Tensile strength (max load) for the snap hook is rated at 5,000 pounds with a gate strength of 3,600 pounds. Meets American National Standards Institute (ANSI) Z359.12 standards. WE MET THE STANDARD, THEN ROSE ABOVE IT: ANSI/ ASSE Z359.11-2014 -- All of KwikSafety’s full-body harnesses have undergone the “Qualification and Verification Testing of Fall Protection Products.” The SCORPION System exceeds the already-rigorous ANSI testing standards and is heavy-duty, high-performance fall protection you can trust to have your back. View the Compliance Label/ Safety Label for more information. PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance. Our KwikSafety SCORPION full body harness and lanyard system supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, see that all buckles are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area. OSHA APPROVED: The Occupational Safety & Health Administration assures men and women safe and healthful working conditions by setting standards and providing training, outreach, education, and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels. The SCORPION System is ideal for construction, arborist work, high-rise window cleaning, gutter cleaning, roofing and thatching, and Search and Rescue.
  • Malta Dynamics Warthog Comfort MAXX Safety Harness Fall Protection, Includes Added Padding, Removable Safety Belt, and Side D-Rings, Construction Full Body Harness - OSHA/ANSI/CSA Compliant (SM-M)
    Bestseller #1
    Malta Dynamics Warthog Comfort MAXX Safety Harness Fall Protection, Includes Added Padding, Removable Safety Belt, and Side D-Rings, Construction Full Body Harness - OSHA/ANSI/CSA Compliant (SM-M) (162)
      🔸Certified with Both OSHA and ANSI: The Warthog MAXX body harness is OSHA and ANSI compliant. The compliancy guidelines met include: ANSI Z359.11-2014, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910. Safety is the number one priority with the Warthog MAXX and makes a perfect addition to your roofing harness safety kit! 🔸Comfort with Functionality: Our full body safety harness provides maximum comfort with, full shoulder, back, waist and leg padding. Includes a removable waist belt that is not sewn into the harness.This allows for full movement while still being attached in case of a fall. Our safety harness fits a weight range of 130-310lbs per ANSI Capacity Range. The reinforced quick connect leg straps and chest harness with side D-Rings helps make this the best work fall harness on the market. 🔸Perfect for Construction & Roof Work: This full body construction harness is the perfect roofing harness specifically designed with premier fall arrest gear to meet OSHA and ANSI guidelines. We offer unmatched safety harness fall protection and you can feel confident with features such as the alloy steel side D-Rings, break away lanyard keepers and quick connect chest buckle. You will not find more perfect fall arrest system gear anywhere! 🔸Strong & Durable Material: Our fall protection harness is made from a durable reinforced polyester webbing material. It boasts a flexible, comfortable and removable support waist belt and includes a fall indicator. The waist belt offers additional padding for comfort and support. The Warthog Comfort MAXX provides side D-Rings and buckles that are made from steel for premium strength and performance. You can feel confident that the Warthog Comfort MAXX will stand the test of time. 🔸Guaranteed for Peace of Mind: We are so confident that the Warthog Comfort MAXX is one of the best on the market that we extend a Limited Lifetime Warranty on each purchase. Whether you are using your new Warthog Maxx as a construction harness or as landscaping safety equipment, rest assured that you have made the right choice.
  • KwikSafety (Charlotte, NC) SUPERCELL (Shoulder Padding) Safety Harness | ANSI OSHA Full Body Fall Protection | Dorsal Ring Side D-Rings Tongue Buckle Straps Tool Lanyard Construction Tower Roofing
    Bestseller #1
    KwikSafety (Charlotte, NC) SUPERCELL (Shoulder Padding) Safety Harness | ANSI OSHA Full Body Fall Protection | Dorsal Ring Side D-Rings Tongue Buckle Straps Tool Lanyard Construction Tower Roofing (774)
      WE DON'T CUT CORNERS ON SAFETY: The KwikSafety SUPERCELL is a durable, heavy duty, high performance Full Body Harness that meets and exceeds ANSI/ASSE Z359.11-2014 standards. Our safety harness fall protection is the complete safety package. Be seen and safe with the fluorescent yellow synthetic material. Use with any compatible fall protection safety lanyard, energy absorbers, lifelines, and anchorage lanyards. Safely perform the job knowing the SUPERCELL fall protection harness has your back! HEAVY DUTY D-RINGS: One back dorsal ring and two side hip rings provide functionality on the construction job. The side rings are for work positioning purposes only; while the dorsal ring used for fall arrest & can be used for travel restraint or rescue. Shoulder support paddings have been added to prevent injury and provide comfort. The load bearing tongue buckle straps on our universal harness are made out of non-recycled synthetic material that is equivalent or superior to polyester. PROPER FIT, PROPER PERFORMANCE: Regardless if its a mens or womens harness, correct fit is essential for proper performance. Our adjustable KwikSafety SUPERCELL full body harness supports users within the capacity range of 130 to 310 pounds (59 to 140 kg), 4’10” to 6’6” (147 to 198 centimeters) due to the adjustment points. To ensure your harnesses properly fit, see that all buckles are connected, leg and shoulder straps are snug, and chest straps are in the center of the chest area. WE MET THE STANDARD, THEN ROSE ABOVE IT: ANSI/ ASSE Z359.11-2014: All of our KwikSafety Full Body Harnesses have undergone the "‘Qualification and Verification Testing of Fall Protection Products’". This testing specifies requirements which include the number of specimens to be tested, test equipment to be used, the accreditation of the testing lab and the duties and responsibilities of both the manufacturer and the testing lab. View the Compliance Label/ Safety Label for more information. OSHA APPROVED: The Occupational Safety & Health Administration assures men and women safe and healthful working conditions by setting standards and providing training, outreach, education, and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels. The SUPERCELL safety fall protection harness is ideal for a roofer, ironworker, construction work, arborist work, high-rise window cleaning, gutter cleaning, roofing and thatching, and Search and Rescue.
  • AFP Full Body Safety Harness 3D-Ring w/ Shoulder & Back Padding Support Belt, and Tongue Buckles | Fall Protection | Construction, Carpenter, Scaffolding, Roofing (OSHA/ANSI) (Large/XLarge, Hi-Viz Orange)
    Bestseller #1
    AFP Full Body Safety Harness 3D-Ring w/ Shoulder & Back Padding Support Belt, and Tongue Buckles | Fall Protection | Construction, Carpenter, Scaffolding, Roofing (OSHA/ANSI) (Large/XLarge, Hi-Viz Orange) (153)
      ✅COMFORT – Engineered with plush pads for added comfort and delivers relief to shoulders and upper back. The reinforced foam shoulder pads provides added comfort. Wicking material averts the harness from sweat and moisture deterioration. Constructed with an extra-wide waist belt for major back support. Waist belt side belt straps designed thinner to allow for better lateral movements. Waist belt includes vertical cushions to soothe the lower back. ✅SAFE – Standout and be easily spotted with our high-visibility orange harness. Alloy steel D-rings ensures all weather performance preventing corrosion against all weather conditions. Rugged construction endures rough use, standing up to long periods of outdoor elements including sun exposure without tearing or fraying for added longevity. ✅RELIABLE – Upgraded braided webbing designed with a high-tension stitching pattern for maximum security and a tensile strength of over 5,000 lbs.! The tough webbing is highly resistant to abrasion, aging, and won’t soften from frequent use. This webbing has low shrink properties and a high-temperature threshold. Our harnesses have a build quality that is second-to-none, backed by decades of design, research, manufacturing know-how and on-the-job performance. ✅CONVENIENT – The AFP 6 FT Internal Shock Absorbing Lanyards are made with lightweight, heavy-duty, high-strength outer polyester webbing and a polyester core specially sewn in to reduce impact forces, with two substantially secure heavy-duty double-locking gates. ✅DURABLE – The tough webbing is highly resistant to abrasion, aging, and won’t soften from frequent use. This webbing has low shrink properties and a high temperature threshold.
  • Also read Ktm rc 125 Also read Earring storage case Also read Ceramic cardinal bird Also read Foot bells

Leave a Reply

Your email address will not be published. Required fields are marked *